Skip to content

Flink Writes🔗

Iceberg support batch and streaming writes With Apache Flink's DataStream API and Table API.

Writing with SQL🔗

Iceberg support both INSERT INTO and INSERT OVERWRITE.

INSERT INTO🔗

To append new data to a table with a Flink streaming job, use INSERT INTO:

INSERT INTO `hive_catalog`.`default`.`sample` VALUES (1, 'a');
INSERT INTO `hive_catalog`.`default`.`sample` SELECT id, data from other_kafka_table;

INSERT OVERWRITE🔗

To replace data in the table with the result of a query, use INSERT OVERWRITE in batch job (flink streaming job does not support INSERT OVERWRITE). Overwrites are atomic operations for Iceberg tables.

Partitions that have rows produced by the SELECT query will be replaced, for example:

INSERT OVERWRITE sample VALUES (1, 'a');

Iceberg also support overwriting given partitions by the select values:

INSERT OVERWRITE `hive_catalog`.`default`.`sample` PARTITION(data='a') SELECT 6;

For a partitioned iceberg table, when all the partition columns are set a value in PARTITION clause, it is inserting into a static partition, otherwise if partial partition columns (prefix part of all partition columns) are set a value in PARTITION clause, it is writing the query result into a dynamic partition. For an unpartitioned iceberg table, its data will be completely overwritten by INSERT OVERWRITE.

UPSERT🔗

Iceberg supports UPSERT based on the primary key when writing data into v2 table format. There are two ways to enable upsert.

  1. Enable the UPSERT mode as table-level property write.upsert.enabled. Here is an example SQL statement to set the table property when creating a table. It would be applied for all write paths to this table (batch or streaming) unless overwritten by write options as described later.
CREATE TABLE `hive_catalog`.`default`.`sample` (
    `id`  INT UNIQUE COMMENT 'unique id',
    `data` STRING NOT NULL,
    PRIMARY KEY(`id`) NOT ENFORCED
) with ('format-version'='2', 'write.upsert.enabled'='true');
  1. Enabling UPSERT mode using upsert-enabled in the write options provides more flexibility than a table level config. Note that you still need to use v2 table format and specify the primary key when creating the table.
INSERT INTO tableName /*+ OPTIONS('upsert-enabled'='true') */
...

Info

OVERWRITE and UPSERT can't be set together. In UPSERT mode, if the table is partitioned, the partition fields should be included in equality fields.

Writing with DataStream🔗

Iceberg support writing to iceberg table from different DataStream input.

Appending data.🔗

Flink supports writing DataStream<RowData> and DataStream<Row> to the sink iceberg table natively.

StreamExecutionEnvironment env = ...;

DataStream<RowData> input = ... ;
Configuration hadoopConf = new Configuration();
TableLoader tableLoader = TableLoader.fromHadoopTable("hdfs://nn:8020/warehouse/path", hadoopConf);

FlinkSink.forRowData(input)
    .tableLoader(tableLoader)
    .append();

env.execute("Test Iceberg DataStream");

The iceberg API also allows users to write generic DataStream<T> to iceberg table, more example could be found in this unit test.

Overwrite data🔗

Set the overwrite flag in FlinkSink builder to overwrite the data in existing iceberg tables:

StreamExecutionEnvironment env = ...;

DataStream<RowData> input = ... ;
Configuration hadoopConf = new Configuration();
TableLoader tableLoader = TableLoader.fromHadoopTable("hdfs://nn:8020/warehouse/path", hadoopConf);

FlinkSink.forRowData(input)
    .tableLoader(tableLoader)
    .overwrite(true)
    .append();

env.execute("Test Iceberg DataStream");

Upsert data🔗

Set the upsert flag in FlinkSink builder to upsert the data in existing iceberg table. The table must use v2 table format and have a primary key.

StreamExecutionEnvironment env = ...;

DataStream<RowData> input = ... ;
Configuration hadoopConf = new Configuration();
TableLoader tableLoader = TableLoader.fromHadoopTable("hdfs://nn:8020/warehouse/path", hadoopConf);

FlinkSink.forRowData(input)
    .tableLoader(tableLoader)
    .upsert(true)
    .append();

env.execute("Test Iceberg DataStream");

Info

OVERWRITE and UPSERT can't be set together. In UPSERT mode, if the table is partitioned, the partition fields should be included in equality fields.

Write with Avro GenericRecord🔗

Flink Iceberg sink provides AvroGenericRecordToRowDataMapper that converts Avro GenericRecord to Flink RowData. You can use the mapper to write Avro GenericRecord DataStream to Iceberg.

Please make sure flink-avro jar is included in the classpath. Also iceberg-flink-runtime shaded bundle jar can't be used because the runtime jar shades the avro package. Please use non-shaded iceberg-flink jar instead.

DataStream<org.apache.avro.generic.GenericRecord> dataStream = ...;

Schema icebergSchema = table.schema();


// The Avro schema converted from Iceberg schema can't be used
// due to precision difference between how Iceberg schema (micro)
// and Flink AvroToRowDataConverters (milli) deal with time type.
// Instead, use the Avro schema defined directly.
// See AvroGenericRecordToRowDataMapper Javadoc for more details.
org.apache.avro.Schema avroSchema = AvroSchemaUtil.convert(icebergSchema, table.name());

GenericRecordAvroTypeInfo avroTypeInfo = new GenericRecordAvroTypeInfo(avroSchema);
RowType rowType = FlinkSchemaUtil.convert(icebergSchema);

FlinkSink.builderFor(
    dataStream,
    AvroGenericRecordToRowDataMapper.forAvroSchema(avroSchema),
    FlinkCompatibilityUtil.toTypeInfo(rowType))
  .table(table)
  .tableLoader(tableLoader)
  .append();

Branch Writes🔗

Writing to branches in Iceberg tables is also supported via the toBranch API in FlinkSink For more information on branches please refer to branches.

FlinkSink.forRowData(input)
    .tableLoader(tableLoader)
    .toBranch("audit-branch")
    .append();

Metrics🔗

The following Flink metrics are provided by the Flink Iceberg sink.

Parallel writer metrics are added under the sub group of IcebergStreamWriter. They should have the following key-value tags.

  • table: full table name (like iceberg.my_db.my_table)
  • subtask_index: writer subtask index starting from 0
Metric name Metric type Description
lastFlushDurationMs Gague The duration (in milli) that writer subtasks take to flush and upload the files during checkpoint.
flushedDataFiles Counter Number of data files flushed and uploaded.
flushedDeleteFiles Counter Number of delete files flushed and uploaded.
flushedReferencedDataFiles Counter Number of data files referenced by the flushed delete files.
dataFilesSizeHistogram Histogram Histogram distribution of data file sizes (in bytes).
deleteFilesSizeHistogram Histogram Histogram distribution of delete file sizes (in bytes).

Committer metrics are added under the sub group of IcebergFilesCommitter. They should have the following key-value tags.

  • table: full table name (like iceberg.my_db.my_table)
Metric name Metric type Description
lastCheckpointDurationMs Gague The duration (in milli) that the committer operator checkpoints its state.
lastCommitDurationMs Gague The duration (in milli) that the Iceberg table commit takes.
committedDataFilesCount Counter Number of data files committed.
committedDataFilesRecordCount Counter Number of records contained in the committed data files.
committedDataFilesByteCount Counter Number of bytes contained in the committed data files.
committedDeleteFilesCount Counter Number of delete files committed.
committedDeleteFilesRecordCount Counter Number of records contained in the committed delete files.
committedDeleteFilesByteCount Counter Number of bytes contained in the committed delete files.
elapsedSecondsSinceLastSuccessfulCommit Gague Elapsed time (in seconds) since last successful Iceberg commit.

elapsedSecondsSinceLastSuccessfulCommit is an ideal alerting metric to detect failed or missing Iceberg commits.

  • Iceberg commit happened after successful Flink checkpoint in the notifyCheckpointComplete callback. It could happen that Iceberg commits failed (for whatever reason), while Flink checkpoints succeeding.
  • It could also happen that notifyCheckpointComplete wasn't triggered (for whatever bug). As a result, there won't be any Iceberg commits attempted.

If the checkpoint interval (and expected Iceberg commit interval) is 5 minutes, set up alert with rule like elapsedSecondsSinceLastSuccessfulCommit > 60 minutes to detect failed or missing Iceberg commits in the past hour.

Options🔗

Write options🔗

Flink write options are passed when configuring the FlinkSink, like this:

FlinkSink.Builder builder = FlinkSink.forRow(dataStream, SimpleDataUtil.FLINK_SCHEMA)
    .table(table)
    .tableLoader(tableLoader)
    .set("write-format", "orc")
    .set(FlinkWriteOptions.OVERWRITE_MODE, "true");

For Flink SQL, write options can be passed in via SQL hints like this:

INSERT INTO tableName /*+ OPTIONS('upsert-enabled'='true') */
...

Check out all the options here: write-options